Vanguard Rack VRM1500 UPS
Product Code: 530VRM1500
Vanguard Rack VRM1500 UPS
TECHNOLOGIES
The VANGUARD RACK is a double conversion On Line UPS capable of guaranteeing a clean and uninterrupted output of energy, regardless of the conditions of the distribution network. The transition from mains operation to battery operation is immediate, ensuring continuity even to the loads
sensitive to the most imperceptible interruptions. It is classified by the European standard as VFI-SS-111, according to the EN 62040-3 standard.
VERSATILE
The VANGUARD RACK is ideal for all installations thanks to the different models that allow it to be inserted both in standard Rack cabinets and in shallow cabinets, typical in Telecom environments.
EFFICIENT
The very high quality of the components and the technical solutions adopted in the design ensure that the UPS VANGUARD RACK offers maximum performance even in difficult conditions. This allows its use even when the highest performances are required. In addition, its very high efficiency allows the VANGUARD RACK UPS to recognize white certificates related to energy saving. The VANGUARD RACK UPS also allows you to select the High Efficiency mode to obtain minimum consumption, when the On Line double conversion technology is not necessary.
CONNECTED
The VANGUARD RACK UPS has been equipped with every type of connection that may be needed if we consider the power outputs, the communication ports and the management through software. In detail, it is equipped with a USB port, RS232, Smart Slot for the use of optional SNMP and AS400 cards, two groups of programmable outputs and the EPO (Emergency Power Off) which allows it to be installed even in environments that require more high level of security. The UPS can also be equipped with an external manual bypass.
HOT SWAP BATTERIES
The battery module can be replaced easily and quickly from the front panel without having to interrupt UPS operation and load power.
AUTONOMY EXPANSION
It is possible to increase the autonomy of UPS VANGUARD RACK, for the desired duration, thanks to the Battery Pack that can be connected to the dedicated connector. In addition, it is possible to reduce recharging times by equipping the system with additional battery chargers.
- Model: VRM1500
- Power (VA / W): 1500/1050
- Connections in: IEC 10 A / schuko socket and cable
- Out connections: 2 + 2 x IEC 10 A programmable
- Communication interface: RS232 (bi-directional port) & dry contacts + UsB (if used, disable RS232)
- Display: Interactive LCD
- Epo: YES, Emergency power OFF "NC"
- Standards EN 62040-1 / EN 62040-2
- Dimensions (LxWxH) mm 19 "x 425 x 2U (440 x 425 x 88)
- Weight (net / gross) kg 19.1 / 21.1