CableIQ is the first tool specially designed for network technicians who must identify problems and qualify the bandwidth of cables. With CableIQ, even novice technicians will be able to distinguish between wiring problems and network problems and find out what is on the opposite end of any type of cable. For network technicians, this means faster call termination, a reduction in time spent on operations and a saving of money thanks
better use of the infrastructure.
Reduction of 30% of requests for assistance forwarded to higher levels
The powerful troubleshooting features and CableIQ's intuitive interface enable service technicians to identify and solve a wider range of infrastructure problems. Is the door active? Do the duplex settings match? Is the problem at the network or cable level? Is the cable compatible with the required network bandwidth? CableIQ is the only tool that can answer all these questions before service requests are forwarded to the level
Time to solve problems with half the cables.
CableIQ tells the technician whether the wiring is compatible with the bandwidth required by the network and provides detailed information on the nature and location of cable performance problems. The intelligent cable mapping graphically displays the wiring configuration indicating the distance from interruptions and short circuits. In addition, advanced diagnostics detect and localize connection problems that are not related to cable mapping, such as diaphragms and impedance changes of some importance. IntelliTone's built-in digital technology allows you to generate signals and identify cables without disconnecting from the network. With CableIQ, technicians can close service requests faster, cutting the time needed to solve cable problems by half.
Painless transition to VoIP or Gigabit Ethernet solutions
In order to implement Voice over IP (VoIP) or Gigabit Ethernet solutions, it is necessary to verify that the existing cabling is compatible with the bandwidth requirements of the new equipment. Even if the wiring is certified, moves, additions and modifications may have made many connections unsuitable to support the desired speeds. CableIQ quickly reveals if a connection, including connection cables, is qualified for voice, 10 / 100BASE-T, VoIP or voice. Knowing the bandwidth capabilities of the cables before upgrading can avoid countless hours of future downtime and wasted labor for superfluous troubleshooting.
|Quickly check the wiring of video / CATV systems with the Autotest function lasting 4 seconds||Measure the length and continuity of the wiring and detect the distance between short circuits and interruptions||CATV video signal detection|
|TDR test for the identification of impedance variations in the section||The "" intelligent wiremap "function displays the interruptions of each pin (eg pin 6 interrupted at 130 ft)||The "multi-map" function displays the graphic map and the ID of the voice jacks in a single screen|
|Types of cable supported||UTP, STP, FTP, SSTP, RG6, RG59, audio, security|
|Automatic qualification tests||1000BASET, 100BASETX, 10BASET, VOIP, 1394b, S100, TELCO, mapping only, coaxial|
|Supported tests||Cable mapping, length, signal performance on cables, digital and analogue signal output, Ethernet port detection and identification, analog telephone detection, flashing port light, continuity, speaker testing, cable fault detection, video signal detection|
|Cable mapping||It detects single-wire faults and supports MultiMap mode with up to seven remote office identifiers. Draw proportionally the length of the conductor to the point of interruption. Detect split pairs.|
|Fault identification||Measure crosstalk and impedance by comparing them with the corresponding limits based on selected qualification tests. It localizes the significant variations of impedance as well as those due to the permutations present in the wiring and determines if they are able to jeopardize the qualification of the application|
|Storing the results||Up to 250 qualification tests|
|Supply||Type of batteries: 4 AA alkaline batteries (NEDA 15A, IEC LR6)|
|Battery life||20 hours in standard conditions, without backlighting|
|Other types of battery supported||4 lithium AA batteries, NiMH, NiCAD|
|Dimensions and weight||17.8 cm x 8.9 cm x 4.5 cm, 550 gr|
|Lead time expected: working days||10|
Out of stock
Out of stock