Brand:
Loox
Loox LOHD73XS HDMI & IR Extender on 60m UTP cable with Hdmi In / Out
Product Code: 840LOHD73XS
Inventory Status:
in stock
Quantity | Price | VAT excluded | VAT included |
---|---|---|---|
1 | Default | €67.90 | €82.838 |
1 | Promo | €64.505 | €78.6961 |
* During the order confirmation phase, the prices including VAT will be rounded to the second decimal place according to with current legislation
Loox LOHD73XS HDMI & IR Extender on 60m UTP cable with Hdmi In / Out
Extender of HDMI video signal and IR (infrared) signal over distances up to 60 meters via a single Cat. 5e / 6 UTP network cable .
It is also capable of retransmitting the infrared signal of the remote control with a frequency between 20 and 60 kHz, therefore also the IR signal of the remote controls of the Sky HD and Sky Q decoders. It supports resolutions up to Full HD 1080p including 1080p 3D.
It is also capable of retransmitting the infrared signal of the remote control with a frequency between 20 and 60 kHz, therefore also the IR signal of the remote controls of the Sky HD and Sky Q decoders. It supports resolutions up to Full HD 1080p including 1080p 3D.
The transmitter has a pass- through HDMI output to connect an additional local monitor and the Power over Cable (PoC) function allows you to use only one power supply connected to the transmitter , the receiver is powered directly by the network cable, greatly facilitating its installation.
Note: it is possible to reach the indicated distances and resolutions by connecting the transmitter and receiver with a good quality UTP solid core network cable. By using a different network cable or by introducing wall plates, extensions or patch panels, it is possible to reduce the maximum distance supported.
In short
- Transmits HDMI video and audio signals over a single UTP Cat. 5e / 6 / 7e cable up to 60 meters
- Support video resolution up to 1920 * 1080 @ 60Hz
- Support EDID copy function
- 20 ~ 60kHz one-way IR support
- POE power supply with 12V / 1A power supply connected to the transmitter only
- The transmitter supports an HDMI local output
- Compatible with HDMI 1.3 and HDCP 1.2 standards
- IEEE-568B standard
- Automatically interfaces with the source and displays
- ESD protection system
- Simple installation: plug and play
Video Specifications
- HDMI standard: 1.3
- Pixel clock (max): 165MHz
- Data rate (max): 6.75Gbps
- Resolution: 1920x1080 @ 60Hz
- Connector: HDMI A
- Impedance: 100Ω
IR specifications
- 3.5mm jack interface
- Signal: One-way
- IR frequency 20 ~ 60kHz
Specifications hw
- DC 5-15V / 1A power supply
- Dissipation 3W (max)
- Operating temperature -5 ° C ~ + 70 ° C
- Dimensions: 82x46x23mm
Specifications UTP cable
- RJ45 interface, IEEE-568B standard
- UTP transmission distance Cat. 6 / 7e: 60 meters
- UTP Cat.5e: 40 meters