Promo WellerFT Zero Smog TL Kit 1 Fume extractor for single station + spare filter set FT91015691

Promo WellerFT Zero Smog TL Kit 1 Fume Extraction System for single workstation with set of spare filters cod. FT91015691

IMMEDIATE SAVING OF 16%!

WellerFT Zero Smog TL takes another step forward in the quality of welding and rework fume filtration. Compared to ZeroSmog 2, of which it maintains the characteristics that distinguish it such as the low noise level thanks to the brushless turbine, a filter with a large filtering surface for a high longevity of use, and the rapidity of its replacement, Zero Smog TL uses filters with higher filtering class, pre -filter for fine dust F7 (pre-filter for medium dust M5 in the ZeroSmog2 ) and main filter H13 (H12 in the ZeroSmog2).

As can be seen from the image below, the transition from an M5 filter to an F7 one results in a significant increase in the filtering capacity, reducing the size of the intercepted dust by 10 times, which goes from about 100 microns to 10 microns.

Features

• Extractor fan for use with up to 2 workstations
• Particularly low noise level
• Hand-held extractor for flexible placement directly below or next to the workstation
• Simple filter replacement
• Audiovisual filter alarm
• Quick and easy installation thanks to the Easy-Click system
• Variable volume flow setting
• Activated carbon foam filter for effective gas purification
• High-quality, maintenance-free CE ventilator

WellerFT ZeroSmog TL maintains the same excellent characteristics of ZeroSmog 2: high suction force and flow rate, maintenance-free turbine, filters with large exchange surface and easy maintenance

Technical data

• Dimensions: 335 x 330 x 445mm
• Weight: 9kg
• Mains voltage 230V, 50Hz
• Noise: <50dB(A)
• Power Consumption: 120W
• Max vacuum: 3,000 Pa
• Max flow rate: 190 m3/h
• Pre-filter: fine dust F7
• Compact filter: H13 particle filter and gas filter (10% activated carbon foam)
• Particle filtration according to MPPS >99.95%

WellerFT Zero Smog TL Kit 1 cod. FT91015699 is equipped with everything needed to set up a single station in a few minutes

• Zero Smog® TL vacuum cleaner
• Bench mounted shut-off valve
• Extraction arm, flexible and adjustable, 1 m, ø 60 mm
• Suction hose, 3 m, ø 60 mm
• Funnel-shaped ALFA nozzle
• Remote control switch
• Spare filter set
  

How to replace the filter and pre-filter in Weller FT vacuum systems

Why Weller FT: the consequences of not filtering the processing fumes