Finder 84.02.0.024.0000 2-channel timer for programmable NFC DIN bar

Finder 84.02.0.024.0000 2-channel timer for NFC programmable DIN bar

Finder 84.02.0.024.0000 is a multifunctional timer with two fully independent 16A channels equipped with a large backlit LCD display for easy reading of the parameters: target time, split time, timing indicator in progress, status of inputs and the status of the outputs are always in view.

Programming is flexible and allows you to create specific additional functions by combining the 25 functions available on each channel. A PIN can be set to protect access to programming. It is possible to set the time scale in tenths of a second, seconds, minutes, hours in order to obtain an extremely wide range (from 1 tenth of a second to 9999 hours)

Suitable for all those applications where a precise setting of the times is required, or simply when you want a complete and flexible product in terms of functions, but easy and quick to install.
 

Features

• Power supply voltage: 12-24V AC / DC (non-polarized)
• 2 in 1: two independent channels
• Two programming modes: “Smart” via Smartphone with NFC technology or “Classic” via integrated joystick
• Large backlit LCD display for easy reading of parameters
• Flexibility: ability to create specific functions by combining the 25 functions available on each channel
• Great precision and possibility of choice for the definition of times: - Scale can be set in tenths of a second, seconds, minutes, hours - Times can be set from 1 tenth of a second to 9999 hours
• Large display allows easy viewing of target time, split time, timing indicator, input status, output status
• Separate Start inputs for each channel
• Common Reset input (can be enabled on each channel)
• Common Pause input (can be enabled on each channel)
• PIN settable to protect access to programming
• Counting type selectable increasing or decreasing
• 35 mm rail mounting (EN 60715)