Arduino..066.pdf
(83.34 KB)
Arduino® UNO Rev3 with MCU 8 bit ATmega328 A000066
Product Code: 861ARDUINO-UNO
Inventory Status:
in stock
| Quantity | Price | VAT excluded | VAT included |
|---|---|---|---|
| 1 | Default | €24.30 | €29.646 |
| 1 | Promo | €23.571 | €28.75662 |
* During the order confirmation phase, the prices including VAT will be rounded to the second decimal place according to with current legislation
Arduino® UNO Rev3 board with Atmel ATmega328 microcontroller
It has everything needed to manage the microprocessor; to use it just connect the card to the computer with a USB cable or power it with a power supply (max 12V) or external batteries.
The UNO differs from previous cards in that it does not use the FTDI USB-to-serial chip.
The features introduced in Revision 3 are:
- ATmega16U2 instead of 8U2 as a USB-to-serial converter.
- Pinout 1.0: SDA and SCL pins have been added for TWI communication near the AREF pin and another two new pins have been placed near the RESET pin, the IOREF pin which will allow the shields to adapt to the voltage supplied by the board, and a pin not connected, reserved for future purposes.
- More effective RESET circuit.
Technical specifications
- Microcontroller: ATmega328
- Operating voltage: 5V
- Power supply voltage (recommended): 7-12V
- Maximum Supported Voltage: (not recommended) 20V
- Digital I / O: 14 (6 of which with PWM output)
- analog inputs: 6
- Output current for I / O Pin: 40 mA
- Output current for 3.3V Pin: 50mA
- Flash memory: 32 KB (ATmega328) of which 0.5 KB used bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock speed: 16 MHz
Arduino® code: A000066, 7630049200050
