Fluke 717 30G Pressure Calibrator

Features overview

• Pressure measurement, 0.05% of full scale with internal sensor, up to 30 psi
• Measure mA with 0.15% accuracy, 0.001mA resolution, and 24V loop power.
• Pressure measurement to 10,000 psi/700 bar, using one of 29 modules of 29 Fluke 700Pxx
• 1/8 NPT female pressure connector
• Compatibility with non-corrosive gases and liquids
• Selection of eleven different technical units
• Zero, Min, Max and Hold functions
• Calibration of P/I instruments with simultaneous measurement of pressure and current
• Pressure switch test function that can detect settings, reset and deadband values of a pressure switch
• % Error calculation of mA measurements for quick pass/fail test decision
• Long battery life
• Protective shell with compartment for tips
• Compatible with the ToolPack magnetic attachment system
• New pressure switch test function

PRESSURE

• Accuracy: 0.05% of full scale
• Functions: Zero, Min, Max, Hold, Damp
• Range: -12 to 30 psi, (-850 mbar to 2 bar; -83 to 206.84 kPa)
• Resolution: 0.001psi, 0.1mbar, 0.01kPa
• Overpressure: 2 X full scale

CURRENT

• Range: 0 to 24mA (-25% to 125%)
• Resolution: 0.001mA
• Accuracy: 0.015% + 2 points

LOOP POWER

• Range: 24Vdc
• Accuracy: +/- 10%
• Note: Supply 20mA into 1000 ohms for battery > 6.8V; 700W for 5.8 to 6.8V battery

SPECIFICATIONS

• Security specifications: CSA C22.2 no. 1010.1:1992
• Dimensions: 201mm x 98mm x 52mm (W x H x D)
• Weight: about 600 g with shell
• Warranty: 3 years
• Shock and Vibration: Random, 2G, 5-500Hz
• Drop test: 1m
• Battery Type: Single 9V ANSI/NEDA 1604A or IEC 6LR619V alkaline battery