Weller SPI15 210 Longlife conical soldering tip Ø 0.4 mm L 45 mm for SPI16 SP15N WHS40 WHS40D – 4SPI15210-1

Weller SPI15 210 Longlife soldering tip Ø 0.4 mm for SPI16, SP15N, WHS40 and WHS40D

The Weller SPI15 210 is an original soldering tip from the SPI series designed for precision electronics work. The tip features a 0.4 mm pointed tip and an overall length of 45 mm, allowing for precise work on small joints, terminals, and electronic components.

The current Weller reference is 4SPI15210-1, while the Elcoteam board also retains the 4SPI15210 code and the equivalence with the previous Weller tip T0054321099, also identified as S31.

The tip is suitable for the Weller SPI16 soldering iron and the WHS40 and WHS40D stations. Elcoteam also indicates its compatibility with the SP15N. It is supplied individually in bulk, without blister packs or individual packaging.

Technical features

0.4mm tip for precision soldering

The 0.4 mm tip makes the Weller SPI15 210 particularly suitable for jobs where it is necessary to concentrate the heat on a small area and maintain good control of the contact point.

It is therefore suitable for small joints, thin terminals, electronic components and repair jobs where a larger tip would be imprecise.

Pointed / needle shape

Weller classifies the SPI15 210 as a "Pointed" tip, while sales literature also identifies it as needle-shaped or pencil-shaped. It is therefore a thin, pointed shape with 0.4 mm tips.

This shape facilitates access to small solder points and relatively narrow areas of the circuit board.

Length 45 mm

The tip has an overall length of 45 mm. The elongated geometry allows for good visibility of the welding point during precision work.

Weller SPI Series

The SPI15 210 belongs to the Weller SPI Soldering Tips family and is made as a HM Longlife tip to ensure good durability during normal use.

To preserve the surface of the tip, it is advisable to keep it properly tinned during use and avoid abrasive cleaning operations that could damage the protective coating.

Compatible with Weller SPI16

Weller officially identifies the SPI15 210 as the tip for the SPI16 soldering iron. The 0.4 mm size makes it one of the solutions in the series dedicated to the finest work.

Compatible with Weller WHS40 and WHS40D

The tip is also used on the Weller WHS40 and WHS40D stations. The Elcoteam datasheet also associates this reference with the WH40 and SP15N tools.

Before replacing it is always advisable to check the model of the stylus installed on your station, especially in the case of previous generation Weller equipment.

Bulk version

The item marketed by Elcoteam is supplied as an original Weller item in bulk, without blister packs or individual boxes. The package includes a single tip.

Applications

• Precision electronic welding
• Small solder joints
• Small terminals and conductors
• Printed circuit board repair
• Electronic maintenance
• Electronic assembly
• Technical laboratories
• Electronic Hobbies

Advantages of the Weller SPI15 210

• Original Weller tip
• SPI Series
• Type HM Longlife
• 0.4mm fine tip
• Pointed shape for precision work
• Length 45 mm
• Compatible with SPI16
• Compatible with SP15N
• Compatible with WHS40
• Compatible with WHS40D
• Suitable for soldering small components and terminals
• Single pack

Product codes: 4SPI15210-1, 4SPI15210, SPI15 210, SPI15210, SPI15-210, T0054321099, 0054321099, 054321099, 54321099, S31, 5204SPI15210, 4003019433353, 037103266323.